Signature TCR-07, Руководство пользователя

Страница: 12 / 131

TFT MONITOR OPERATION
Disc Insertion/Ejection
Press the ( ) button on the front zone remote control or press the ( ) button on the
front panel for disc insertion/ejection.
Rear Camera Mode
When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit,
the TFT monitor will automatically switch to the camera input source.
Image Settings
Video Output Format
The table below shows the video output format for each source.
Adjustable Parameters
While in RGB mode, the only parameter that can be adjusted is brightness (BRIGHT). To access
“SHARPNESS” “COLOR” “CONTRAST” “BRIGHTNESS” and “TINT ”you must be in CVBS
Mode.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the PIC button on the remote or press and hold the PIC button on the unit.
2. Select Item to Set:
Press the ( / ) buttons on the remote or press the SMART DIAL buttons on the front panel to
select an item.
3. Set Parameters:
Press the ( / ) buttons on the remote or rotate the SMART DIAL clockwise/counterclockwise
to adjust the selected feature to the desired setting.
4. Exit Picture Quality Setting Mode:
Press the PIC button on the remote or press and hold the PIC button on the unit.
NOTE: There must be a video signal present on the AUX or CAMERA input to adjust the above
Settings.
8
SAT RGB Mode