Signature SHD60PERI/2, Инструкция по эксплуатации, Страница: 23 / 31

1. If you have an outlet to the outside, your cooker hood can be
connected as below picture by means of an extraction duct (enamel,
aluminum, flexible pipe or inflammable material with an interior
diameter of 150mm).
2. Before installation, turn the unit off and unplug it from the outlet.
3. The cooker hood should be placed at a distance of 65-75cm(26-30
inch) from the cooking surface for the best effect. See pic .1.
4. According to the suggested install height of cooker hood, drill 8 holes
for installing the cooker hood. A is for fixing the Plate II and the inner
chimney. B is for fixing the Plate I and the inner and outer chimneys on
the wall.C is for hanging the cooker hood on the wall.D is the safety
locks which are used to fix the cooker hood more safely. Use 2 screws
(4*40mm) and wall plugs provided to hang the cooker hood on the
Position C. See pic .2.
5. Attach the exhaust pipe on the way wall valve as shown below. Fix the
exhaust pipe on the valve by cable tie. Two side of the extensible pipe
i i i i i i 1 3 i c c i
valve. See pic .3 ,pic.4.
6. Put the inner chimney on the outer chimney. Install plate
Ⅰ
on the
outer chimney by two screws (4mm x 8mm). Drill holes on the wall for
-
22
-