the appliance is to be fixed to its support, thanks to refer to
the section “INSTALLATION AND FIXING”.
●
The cooker hood is made of high quality materials in a streamlined design.
●
Equipped with high power and low noise electric motor, the cooker hood
produces strong suction, low noise.
●
With the isolated low voltage circuit board control, 12V dc input, the lights
are therefore safer.
●
Special wind tunnel construction, free dirt will be absorbed in s second.
●
The cooker hood should be placed at a distance of 65-75cm from the
cooking surface for safety and best effect. See Fig.1
●
There shall be enough room for the installation
●
Install the hook on a suitable place once the installation height is fixed, and
keep it in line. The fixed position of the hood bracket is the place of the
chimney. See Fig. 2.
●
Put the cooker hood on the hook, then fix the hood on the hook by screws,
See Fig.3 and 4.
●
Fix the extensible tube on the hood, see Fig.5.
●
Install the inside and outside chimney, and fix outside chimney on the wall,
see Fig.6.
●
Adjust the height of inside chimney to the position of chimney hook, then fix
on it by screw. See Fig.7.
FEATURE
INSTALLATION
-17-
