TEST
Clean the parts of the
with lukewarm
water on a soft cloth or with a neutral detergent and
with clear water, then wipe them dry.
Notes: Electric parts of the appliance can only be
wiped by dry cloth.
The electronic control panel default temperature
setting displays -18°C when turn on electricity,
compressor begin to work, open the door and the
light is on, it means LED light is normally working.
Close the door and wait 30 minutes. If the
temperature in the freezer compartment decreased
obviously, it shows that the appliance system works
well. When the appliance operates for a period of
time and the door is not too often opened, will begin
automatic circulation when system temperature
reaches the set temperature, appliance always keep
temperature about set value
.
If the above steps are successful, the trial operations
are finished. The appliance works normally.
appliance
Use your appliance according to the following
control regulations, your appliance has the
corresponding functions and modes as the control
panels showed in the pictures below. When the
appliance is powered on for the first time, the
backlight of the icons on display panel starts working.
If no buttons have been pressed and the doors are
closed, the backlighting will turn off.
DISPLAY CONTROLS
-47-
