8
-. Power connection
The location of the 115V 60Hz power
connector must be located on the
rear side of the product as shown in
the picture.
When installing the product, make
sure to check whether the cord is
hung on the hook on the rear side
so that it is not pressed on the
refrigerator. Damaged power cord
can cause a fire.
- Installation space for water supply pipe
Place the water hose for ice
maker and water dispenser as
shown in the picture, and
prepare hose to come up from
the floor.
(Copper pipe with diameter of
5/16”(8mm) is recommended
for the water hose.)
If the water pipe and water
hose is located far from the
product, bury the water hose
on the floor and provide appropriate treatment.
7. Connecting power and securing space for
water supply pipe
1/2”
(10mm)
3-3/16”
(81mm)
2-3/4”
(70mm)
19-1/4”
(489.5mm)
6-1/8”
(155mm)
1”
(25.5mm)
(Unit : In)
8-1/2”(220mm)
6”
(152mm)
5-3/4”
(147mm)
5-3/4”
(147mm)
Recommended
space for power
connector
Exposed space for water
supply pipe
Make sure the location of the water supply pipe is within the marked range.
Before connecting the power, always make sure to ground the product. (If the product is
not grounded, the user may be able to feel the electricity due to the minute leakage
current when touching the refrigerator door handle or side corner even when there is no
issue with the product.)
Do not ground the product to gas pipe, plastic water pipe or telephone wire etc. It can
cause electric shock and explosion.
Height from floor
Height from floor
70-1/2”
70-1/2”
(1,790mm)
(1,790mm)
Height from floor
70-1/2”
(1,790mm)
