when you open the door. Wash seal with a mild
detergent and warm water. Rinse and dry it
thoroughly after cleaning.
Caution!
·
Only after the door seals are completely dry
should the appliance be powered on.
Replacing the LED light
Warning:
The LED light must not be replaced by the
user! If the LED light is damaged, contact the
customer helpline for assistance. To replace the LED
light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with
the other hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.
-65-