2
Ryle Roman Tub Faucet Installation Instructions
5. Tighten the set screws on the backs of the handle assembles to secure.
6. Attach theflexible water feed tubes to the handle bodies, and brass T, and hand shower. (Hot water is always on
the left and cold water is always on the right). Curve tubes as necessary to ensure there are no kinks or knots.
7. Connect the main water supply to the handle bodies.
8. After all connections have been made, turn on the water supply, check to make sure that all connections are tight
(no water should be leaking) and that the hot and cold supplies are working correctly. Turn the faucet on and allow
the water to flow through the spout for approximately 60 seconds. Divert the water to the hand shower and allow
the water to flow through the hose for an additional 60 seconds.