1
Rotunda Wall-Mount Faucet Installation Instructions
ROTUNDA WALL-MOUNT FAUCET INSTALLATION
GETTING STARTED
TOOLS AND MATERIALS:
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom fixtures and
plumbing. Signature Hardware accepts no liability for
any damage to the floor, walls, plumbing, or personal
injury during installation.
For the following installation instructions, it is
assumed that any old fixture has been removed and
the main water supply is prepared for faucet installa-
tion.
Unpack and inspect the item for damage. If any
damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all of the required
materials that are needed for the installation.
Plumber’s Tape
Shut off the main water supply where the new faucet
is being installed.
PLANNING
Use the faucet’s PDF specification sheet as a refer-
ence when planning your installation. The specifica-
tion sheet can be found and downloaded from the
product page on our website.
Because the faucet specification
measurements are approximate and slight variations
may occur, we highly recommend performing any
rough-in procedures with the faucet on site.
Drill
Thread Sealant
Tape Measure
Level
Hex Wrench
(provided)
Flathead
Screwdriver
Pipe Clamps
SKU(s): 919045
