DELILAH WALL MOUNT KITCHEN FAUCET
11. Remove the aerator from the spout and turn the
faucet on. Ensure that both hot and cold water are
running properly, and check for any leaks. Allow the
water to flow for approximately 60 seconds to remove
any dust or sediment within the water lines. Reattach
the aerator and turn on the sprayer. Allow the sprayer to
run for another 60 seconds, and check for any leaks.
9. Determine a location to mount the hand shower
cradle on the wall. Remove the cradle from its base by
unthreading it. Hold the cradle base up to the wall and
mark the location of the mounting hole with a pencil.
Set the cradle aside and drill a pilot hole at the marked
location. Use the provided screw and anchor to secure
the cradle base to the wall, then reattach the cradle to
the base.
Important:
If drilling through tile, you must use a
masonry drill bit to avoid cracking the tile.
10. Once installation is complete, turn the main water
supply back on from underneath your sink. Check for
any leaks underneath.
4
Delilah Wall Mount Kitchen Faucet Installation Instructions
ON
60
sec
