background image

CARISSA FREESTANDING FAUCET INSTALLATION

6. Remove the nuts, locking washers, and metal washer 
from each of the mounting screws. Drop each of the 
screws and anchors into the drilled pilot holes, with the 
threads facing up through the floor. 

7. Connect the braided water lines to the main water 
supply at the floor. Ensure that you are connecting the 
hot and cold lines accordingly. Apply thread sealant or 
plumber’s tape to the threads before attaching. Hand 
tighten firmly, then finish tightening using an adjustable 
wrench. Be careful not to overtighten.

5. Drill pilot holes into the floor at the marked mounting 
hole locations. 

3

Carissa Freestanding Faucet Installation Instructions

8. Slide the base of the faucet to the bottom of the 
body, and secure the base to the floor using the 
provided screws. Tighten firmly. 

Threading Facing Up

ON

OFF

Содержание CARISSA

Страница 1: ...umbing and building codes Unpack and inspect the faucet for shipping damage If any damage is found contact our Customer Relations team at 1 866 855 2284 Ensure that you have gathered all the required materials that are needed for the installation For these instructions it is assumed that the floor has been finished and the water supply has been prepared TOOLS AND MATERIALS Plumbers Tape Thread Seala...

Страница 2: ...f the mounting holes on the floor Set the faucet aside 1 Connect the provided braided water lines to the faucet s spout Apply thread sealant or plumber s tape to the threads before tightening Hand tighten the connections firmly 2 Attach the spout to the faucet body Feed the spout s water lines through the top of the faucet body then hand tighten the spout firmly to the body 2 Carissa Freestanding Fau...

Страница 3: ... that you are connecting the hot and cold lines accordingly Apply thread sealant or plumber s tape to the threads before attaching Hand tighten firmly then finish tightening using an adjustable wrench Be careful not to overtighten 5 Drill pilot holes into the floor at the marked mounting hole locations 3 Carissa Freestanding Faucet Installation Instructions 8 Slide the base of the faucet to the botto...

Страница 4: ...your installation by attaching the hand shower to the faucet using the hand shower hose Hand tighten each connection firmly 11 Once installation is complete turn on the main water supply Remove the aerator from the spout and turn the faucet on Allow the water to flow for 60 seconds to remove any dust or loose sediment within the water lines Check for any leaks and that hot and cold water are running...

Отзывы: