BURWELL BIDET TOILET SEAT INSTALLATION
3
Burwell Bidet Toilet Seat Installation Instructions
CLEANING AND MAINTENENCE
Inlet Filter Cleaning:
1. Before you begin, shut off the toilet’s main water supply valve and unplug from the power source.
2. Disconnect the water hose connected to the toilet seat’s inlet.
3. Remove the filter using needle nose pliers, as shown. Clean by rinsing under warm water. Use a brush if needed.
4. Reinsert the filter, and reattach the hose. Plug back into the power source. Turn the water supply back on.
Spray Nozzle Cleaning:
1. Press the “nozzle cleaning” or “rear cleaning” button until
the nozzle protrudes. Wipe clean using a soft cloth.
2. For self-cleaning, press and hold the button. The nozzle
will remain concealed and enter self-cleaning mode.
3. When finished, press the cleaning button again, or the
“stop” button,” to end cleaning mode.
Flushing the Water Reservior:
When the toilet seat is not going to be using for a long
period of time, the water reservior should be discharged to
avoid bacteria buildup or freezing in cold temperatures.
1. Open the cover that is covering the discharge button.
2. Press the discharge button to discharge water from the
reservior.
3. Press slightly downward to turn off the discharge valve
and water.
