Signature Design by Ashley EF30-23B, Руководство пользователя

Страница: 8 / 39

OPERATIONS AND FEATURES
Using the Remote Control
Power
This will turn the unit ON and OFF.
When it is turn OFF, the fan will
continue to run after turning off the
heating function to cool and protect
the unit from overheating up to a
period of 3 minutes
.
When the unit
is turned back ON, the system will
recall the last heat setting used.
Store flame and Heating setting.
Adjust Brightness
This allows you to raise or lower
the level of flame brightness.
Note: when the unit is turned off
that the LOGS completely die out
for 3 seconds.
Timer
This allows you to set the
fireplace to automatically shut
OFF after the amount of time
displayed on the screen, the
timer can be set from 10
minutes to 9 hours, the display
shows 10, 20, 30, 40, 50, 1H, 2H,
3H, 4H, 5H, 6H, 7H, 8H, 9H. Do
not operate fireplace while
unattended.
Adjust Temperature
This allows programming of
the thermostat. The fireplace
can be used without the heater
if desired. Simply cycle through
the function until no
temperature is displayed. Press
and hold the down arrow for
five seconds to switch
temperature readout from
℉
(Fahrenheit) and
℃
(Celsius)
and back. Must be in Heat
mode.
Dynamic Embers
This function will make the
embers of the fire
automatically glow dimmer and
brighter creating a more
realistic fire effect.
Using the Control Panel
Timer/Dynamic Embers
This will allow you to set the
automatic shutoff on the
fireplace. Dynamic Embers
will work on the unit hold 5
seconds when beeps press
again. To stop embers press
timer button then hold for 5
seconds.
Adjust Temperature
This allows programming
of the thermostat. The
fireplace can be used
without the heater if
desired. Simply cycle
through the function until
no temperature is
displayed. Press and hold
the button for five seconds
to switch temperature
readout from
℉
(Fahrenheit) and
℃
(Celsius) and back.
Adjust Brightness Power
This function will cycle
This will turn the unit ON
and OFF. When the unit is
through the five
turned back ON, the system
different levels of flame
will load default factory
brightness.
settings.
MODEL#:
EF30-23B
Page 8 Of 12