SignaMax SC30010, Справочное руководство CLI

Страница: 366 / 671

Chapter 11
| Interface Commands
– 366 –
Command Usage
The switch can display diagnostic information for SFP modules which support
the SFF-8472 Specification for Diagnostic Monitoring Interface for Optical
Transceivers. This information allows administrators to remotely diagnose
problems with optical devices. This feature, referred to as Digital Diagnostic
Monitoring (DDM) in the command display, provides information on
transceiver parameters including temperature, supply voltage, laser bias
current, laser power, and received optical power, and related alarm thresholds.
Example
Console#show interfaces transceiver ethernet 1/28
Information of Eth 1/49
Connector Type : LC
Fiber Type : [0x00]
Eth Compliance Codes : 1000BASE-ZX
Baud Rate : 1300 MBd
Vendor OUI : 00-00-5F
Vendor Name : SumitomoElectric
Vendor PN : SCP6G94-FN-BWH
Vendor Rev : Z
Vendor SN : SE08T712Z00006
Date Code : 10-09-14
DDM Info
Temperature : 35.64 degree C
Vcc : 3.25 V
Bias Current : 12.13 mA
TX Power : 2.36 dBm
RX Power : -24.20 dBm
DDM Thresholds
Low Alarm Low Warning High Warning High Alarm
----------- ------------ ------------ ------------ ------------
Temperature(Celsius) -45.00 -40.00 85.00 90.00
Voltage(Volts) 2.90 3.00 3.60 3.70
Current(mA) 1.00 3.00 50.00 60.00
TxPower(dBm) -11.50 -10.50 -2.00 -1.00
RxPower(dBm) -23.98 -23.01 -1.00 0.00
Console#
show interfaces
transceiver-threshold
This command Displays the alarm/warning thresholds for temperature,
voltage, bias current, transmit power, and receive power.
Syntax
Syntax
show interfaces transceiver-threshold [ interface ]
interface
ethernet unit / port
unit - Unit identifier. (Range: Always 1)
port - Port number. (Range: 25-26/49-52)
Default Setting
Shows all SFP interfaces.