background image

Signamax Connectivity System                                                                                     098-8280/098-82160

 

 

<Autoscan Delay Time> 

 

OSD 
Use cursor keys to navigate to the SCAN option on the OSD Menu, and then hit 
Enter to select and edit the auto scan delay time. The Autoscan Delay Time is 
default to 10 seconds. 

SCAN: 

99

 SEC.

 

The autoscan delay time could be specified within the range of 5 seconds to 99 seconds by an 

increment of 1 second. Users can adjust the scan delay time according to their needs. 

 

<OSD Remain Time> 

 

OSD 
Use cursor keys to navigate to the OSD option on the OSD Menu, and then hit 
Enter to select and edit the OSD Remain time.  The OSD Remain Time is default to 
10 seconds. 

OSD: 

99

 SEC.

 

The OSD time can be specified within the range of 5 seconds to 99 seconds by an increment of 

1 second. Users can adjust this parameter to suit their needs. 

 

<Password Configuration> 

 
OSD 
 
Navigate with cursor keys downward to the PWD CONFIG option and then hit Enter 
key or Insert key to select. Just follow the submenu to Enable or Disable the 
Password Protection. Every time you want to change the password configuration, 
you will be prompted for the password. You have to type in the correct password to 
validate the change. The password is up to 8 characters long and is default to 

00000000

. Later you can change the default password with your own by the PWD 

CHANGE option. 
 
 
 
      
 
                                                     

 

PWD CONFIG

PASSWORD 

ESC

QUIT

DISABLE ?

Enter

SELECT

ESC

QUIT

Enter

SELECT

PASSWORD 

ENABLE ?

ESC

UIT

Q

Enter

SELECT

ESC

QUIT

Enter

SELECT

ENTER PASSWORD 

- - - - - - - -

ESC

QUIT

Enter

SELECT

ESC

QUIT

Enter

SELECT

 
 
 

 The Password Configuration (PWD CONFIG) function is default to “No password protection”. 

On the other hand, if the password protection is enabled, it means every time when the 

KVM Switch is reset, it will prompt the next user for password input. This feature will 

ensure further security over local console to ward off the possibility of any band-intention or 
accidental tempering of your server management by other unauthorized persons. If you have a 

great concern over local console security, you should have the password protection 

Page 26 

www.signamax-us.com

                                                                                                                   

www.signamax-eu.com

 

Содержание 098-82160

































Отзывы: