Signamax
™
065-7940 24-Port Gigabit Ethernet Switch
24
Connecting The Switch
Switch To End Node
Switch To Hub or Switch
Connecting To Network Backbone or Server
NOTE:
All twenty-four (24) high-performance
NWay Ethernet ports can support both MDI-II and
MDI-X connections.
Switch To End Node
End nodes include PCs, routers and other network devices outfitted
with a 10, 100 or 1000 Mbps RJ-45 Ethernet/Fast Ethernet/Gigabit
Ethernet ports.
An end node can be connected to the Switch via a twisted-pair
Category 3, 4, or 5 (or better) UTP/STP cable. The end node can be
connected to any of the ports of the Switch.
Switch connected to an end node
The
Link/Act
LEDs
for each UTP port light green when the link is
valid. The LED over the port label indicates a port speed of either
10/100 Mbps or 1000Mbps. A blinking LED on the bottom
indicates packet activity on that port.
