SignaMax 065-7530, Руководство пользователя

Страница: 25 / 53

Signamax 065-7530/065-7540 Full-Duplex Switches
Installation 17
Optional Module Installation
Signamax 065-7530/065-7540 offers an optional one-port
module for fiber connection. The fiber module is
available in either single or multi-mode; it supports either
a MT-RJ, SC, ST, or VF-45 connector.
The optional module should be inserted into the
extension slot located at the right side of the switch. Port
20X (for 065-7540) will be automatically disabled when
optional module is installed. Before installation, ensure
that the power is disconnected. The module is not
hot-swappable.
Unscrew the cover plate in the
extension slot. Pull out the cover plate, which has a non-
wired board attached. Slide the module in slowly,
following the metal guides. Once it is slid in fully, snap in
the module to make a proper connection and tighten the
screws.
Figure 4: Removal of cover plate
Figure 5: Module being installed