Signamax Connectivity Systems 065-7408x Series
www.signamax-us.com
www.signamax-eu.com
11
Cabling
Step 1: First, ensure the power of the switch and end devices is turned off.
<Note>
Always ensure that the power is off before any installation.
Step 2: Prepare cable with corresponding connectors for each type of port
in use.
<Note>
To connect two regular RJ-45 ports between switches or hubs, you need a
cross-over cable.
Step 3: Consult the previous section for cabling requirements based on
connectors and speed.
Step 4: Connect one end of the cable to the switch and the other end to a
desired device.
Step 5: Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.
