065-1800 series Hardened Media Converter
6
User’s Manual
Toggle Pin 6 to position 0 to disable the link down alarm.
Reconnect the converter to the power supply. The new setting(s) will then take effect.
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on the status of the converter:
LEDs
State
Indication
Steady
Power or ports function abnormally
FAULT
Off
Power and ports function normally
Steady
Power on
PWR stands for POWER
PWR1
PWR2
Off
Power off
Steady
Connection speed is 100 Mbps
100 (Mbps)
Off
Connection speed is 10 Mbps
Steady Link Fault Signaling function enabled
LFS
Off
Link Fault Signaling function
disabled
Steady
A valid network connection
established
LNK stands for LINK
Flashing
Transmitting or receiving data
ACT stands for ACTIVITY
LNK/ACT
Off
Neither valid network connection
established nor
transmitting/receiving data.
Steady
Connection in full duplex mode
FDX stands for FULL-DUPLEX
Flashing
Collision occurred
COL stands for COLLISION
FDX/COL
Off
Connection in half-duplex mode
