Signamax Connectivity System 065-1798
www.signamax-us.com
www.signamax-eu.com
18
--
TKIP:
Enable the TKIP Data Encryption. When the item is selected, you have to continue
setting the Network Key & Confirm network key.
--
Network Key:
The keys are used to encryption data transmitted in the wireless network. Fill
in the text box by following rules below:
Æ
64-bit:
Input 10 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the encryption
keys.
For
example:
“0123456aef”
Æ
128-bit:
Input 26 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the
encryption keys. For example: “01234567890123456789abcdef”
--
Confirm Network Key:
Re-type again the Network key in this text box.
--
Key Length:
You may select the 64-bit or 128-bit to encryption transmitted data. Larger key
length will provide higher level of security, but the throughput will be lower.
--
Key Index (Advanced):
The maximum of key index is 4.
[802.1X configure]
--
EAP TYPE (Extensible Authentication Protocol Authentication Types):
Because WLAN
security is essential and EAP authentication types provide a potentially better means of
securing the WLAN connection, vendors are rapidly developing and adding EAP
authentication types to their WLAN access points. Some of the most commonly deployed EAP
authentication types include
MD5
,
GTC
,
TLS
,
EAP
,
TTSL
,and
PEAP
.
--
Tunnel:
Use the drag-down list to choose the tunnel.
--
Username:
Enter the username for personal certificate.
--
Identity:
Enter the Identity for personal certificate.
--
Password:
Enter the password in advance.
--
Certificate:
Click drag-down list to choose certificate that you want to use.
