33
SIGNAMAX LLC • www.signamax.eu
1U Module Cable Connection
Step 1:
Insert RJ11 plug of 1U module cable to LINE jack and another
side with external wire.
Step 2:
After power on, check ACT status of 1U module. If the indicator
is not on, check the circuit.
1VOP/2VOP Module Cable Connection
Connecting VOP module cable:
Step 1:
Insert telephone line to RJ11/RJ45 interface of 1VOP/2VOP and
another side to telephone.
Step 2:
When having the phone call, pay attention to the indicator of
1VOP/2VOP card back panel. The indicator and Active light should be
on.
1VOS/2VOS Module Cable Connection
Connecting VOS module cable:
Step 1:
Insert telephone line to RJ11/RJ45 interface of 1VOS/2VOS and
another side to small switch or external junction box.
Step 2:
When having the phone call, pay attention to the indicator of
1VOS/2VOS card back panel. The indicator and Active light should be
on.
1ETE Module Cable Connection
Connecting 1ETE module cable:
Step 1:
Insert RJ45 plug of 1ETE cable to RJ45 jack.
Step 2:
Connect another side of RJ45 plug to relevant equipment wire.
1ST Module Cable Connection
Содержание 065-1530
Страница 1: ...Signamax Security Router Model 065 1530 Install Guide Revision A1 ...
Страница 2: ......
