SureCall Fusion2Go 3.0 Fleet
Step 1: Mount Outside Antenna
Identify a location on the vehicle’s roof that (1) has at least a 12-inch radius clear of
obstructions and other radiating elements, such as a radio antenna and (2) at least 6 inches
away from any windows.
Using a drill with a 3/4” hole saw bit, drill hole in the center of the desired location. Remove
the metal collar from the connector and insert the NMO mounting cable through the hole.
(see illustration).
Position threads of the cable mount to extend through the center of drilled hole and above
vehicle surface.
Screw the collar to the base mount, ensuring the mount is centered and tighten with a
wrench. Next, thoroughly clean the mounting area before screwing the antenna onto the
NMO mount. Ensure full contact of the antenna to the vehicle surface.
Note: The outside antenna must not be collocated or operating with any other antenna or
booster.
Once the antenna installation is complete, route the NMO antenna cable inside the vehicle.
To hide the cable, run under headliner and trim to the desired booster location on the floor of
the vehicle.
Note: The outside antenna must not be collocated or operating with any other antenna or booster.
NMO antenna
Collar
NMO Mount
Cable
5
https://www.signalbooster.com | 855.846.2654 | [email protected]
