background image

 

-1- 

 

 

 

INSTALLATION INFORMATION    

MODEL:   SS741MG-007

 

SERIAL NO: _________________________    

 

OPTIONS

 

PURCHASE DATE: ___________________    

_____ 

Alternate Magnum Tones

   

 

DEALER: ___________________________    

_____ 

Two- Tone Enabled 

INSTALLATION DATE: ________________    

_____ Phaser/Man Auxiliary Override 

INSTALLER: ________________________    

_____ 

Phaser Disabled

 

 

Model and serial number located on the top of the amplifier unit 

TABLE OF CONTENTS 

GENERAL DESCRIPTION .......................................................................... 1-2 
INSTALLATION ....................................................................................... 2-10 

UNPACKING ...........................................................................................2 
INSTALLER -SELECTABLE OPTIONS ...................................................... 3-6 
MOUNTING .......................................................................................... 6-7 
SAFETY PRECAUTIONS...........................................................................6 
ELECTRICAL CON NECTIONS.............................................................. 8-10 
WIRING DIAGRAM ................................................................................. 10 

OPERATION ..........................................................................................11-14 

POWER ................................................................................................ 11 
SELECTOR SWITCH .............................................................................. 11 
HORN................................................................................................... 12 
MANUAL FUNCTION ..........................................................................12-13 
MAGNUM MODE.................................................................................... 13 
VOLUME CONTROLS ............................................................................. 14 
MICROPHONE....................................................................................... 14 
AUXILIARY INPUT.................................................................................. 14 
PARK KILL ............................................................................................ 14 
SPEAKER DIAGNOSTICS ....................................................................... 14 

SERVICE ..............................................................................................15-18 

TROUBLESHOOTING............................................................................. 15 
RFI REDUCTION.................................................................................... 16 
PARTS .................................................................................................. 17 
LIMITED WARRANTY ............................................................................. 17 
RETURNS............................................................................................. 17 
SPECIFICATIONS.................................................................................. 18 
CONTROL HEAD CUT-OUT INSTALLATION TEMPLATE ............................ 19 

 

NOTICE 

Due to continuous product improvements, we must reserve the right to change any specifications and information 
contained in this manual at any time without notice.  Signal Vehicle Products, Inc. makes no warranty of any kind 
with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a 
particular purpose.  Signal Vehicle Products, Inc. shall not be liable for errors contained herein or for incidental or 
consequential damages in connection with the furnishing, performance, or use of this manual. 

GENERAL DESCRIPTION 

The SS741MG Remote Siren Amplifier is a premium 200W unit designed for 

dual 100W speaker use.  It comes standard with a remote control head and a noise-
cancelling microphone for PA use.  The amplifier box contains two separate 
amplifiers that allow the user to operate two separate and distinct tones at the same 
time.  This dual tone (Magnum) feature creates a unique sound that is one of the 
most attention getting amplifiers on the market today.  The Magnum sound allows a 
single vehicle to sound like several vehicles traveling at the same time.  Each 
amplifier operates one 100W RMS speaker and has its own fuse.   

The primary operating modes are Phaser, Yelp, Wail, Hands Free, Manual, 

Alert, and Radio.  A Noise Cancelling PA Override and push-button Horn Override 
are available in all modes.  A manual push-button is provided for push-on/push-off 
tone toggle operation in the Phaser, Yelp, and Wail modes.  It also allows manual 
siren control in the Manual, Alert or Hands Free modes.  The Phaser function can be 
optionally replaced by Two -Tone, or disabled entirely, with program jumpers.

 

Содержание SS741MG





















Отзывы: