Technical description and operating manual ST 167 and ST167WB
15
Black – color of all detected WAP with selection of this mode (first cycle).
Red – new WAP appeared with level, exceeding the threshold, given in MENU.
Countdown starting point is moment of selection of this mode.
When new WAP detected, network list update stops and information on screen
«freezes». It is done for showing even short time WAP appearance.
Resume update - click on
.
Also, update stops by pressing
button (appearance of selection rectangle on first line).
Grey – color of WAP, which level is lower than noise level on given channel. This indication is shown for
around 30 sec. During this time WAP status is being analyzed. If level will not increase higher than given in MENU
– WAP disappears from list, if increases – line color will change to black.
For selected WAP analysis press
button.
Information about selected network will appear on screen: network name, MAC
address, channel number and signal level from HS.
Signal level indication, unlike the other information, is not static. Level will change
depending on moving of ST167 relatively to the WAP in real time.
After working with this screen and subsequent returning to W- iFi networks
searching, line color will become black – WAP is not new anymore.
Returning to networks list – repeated pressing on
button.
By pressing on
button transition to signal level indication on this channel is
done. And if on fig.26 we can see only WAP signal level, then on fig.27 signal level on given
channel is shown and it consists of sum of signals:
- WAP (on fig. 26 it is - 63dBm)
- signals from devices, connected to selected WAP.
- signals from other radio emitting devices, using Wi-Fi range.
Ability of 2 signal level values operational control (fig.26 and 27) gives wide ability range for Radio emitting
devices detection in WiFi network range (see additional recommendations)
6.8.2 Bluetooth connections analysis
Detection of Bluetooth connections is analogical to actions, described in previous paragraph.
When device detected information will appear on screen: name, address, type and signal level.
Fig.25
Fig.26
Fig.27
