SIGMATEK XM-400 PRO, Руководство пользователя

Страница: 31 / 35

Cause Correction
Symptom
No sound
No picture
No color
No disc reading
Remote control
failure
Temporary
function failure
Signal not properly connected.
Disc warped or dirty.
Player in mute status.
Signal not properly connected.
TV not set for proper system.
TV system not right.
TV set color not properly adjusted.
No disc in the player.
Disc not properly loaded.
Condensation on the laser head.
Mal-fabricated disc used.
Wrong buttons pressed.
Static leakage into the player from outside.
Connect signal securely.
Clean your disc.
Press MUTE button again.
Connect signal securely.
Reset the AV/TV status of your TV set.
Press P/N button on the remote control to set the system.
Readjust color of your TV set.
Load a disc.
Reload a disc, with the label side facing up.
Turn on the player, unload the disc and leave it on for about one hour.
Remote control not pointing to the sensor
window.
Remote control's operating distance more
than 8 meters away from your TV set.
Batteries low.
Use the remote control properly.
Replace both batteries.
Wait 5~10 seconds and the player will automatically return to normal.
Operate once more.
Turn off the player for 1 to 2 minutes, then turn it on again.
Picture rolling
TV set system not properly adjusted. Readjust system of your TV set.