SIGMATEK SCP 211 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 38

SIGMATEK SCP 211 Скачать руководство пользователя страница 10

SCP 211

S-DIAS SAFETY CPU-MODULE

Page 8

11.10.2021

Designated Use

The  Safety  modules  are  designed  for  use  in  safety-oriented
applications  and  meet  the  required  conditions  for  safety
operation  in  compliance  with  Performancelevel  e  (PL  e),  in
accordance with EN ISO 13849-1 and SIL 3 in accordance with
EN 62061.

For your own safety and the safety of others, use Safety modules
for  their  designated  purpose  only.  Correct  EMC  installation  as
well  as  proper  transport  and  storage  are  also  included  under
designated use.

Non-designated use consists of:

•

any change made to the Safety modules of any kind.

•

the use of damaged Safety modules.

•

the use of the Safety module outside of the instructions
described in this handbook.

•

the use of the safety module inconsistent with the
technical data described in this handbook.

Operator Due Diligence

The operator must ensure that

•

the Safety modules are to be used for their designated
purpose only.

•

the Safety modules are to be operated in error-free, fully
functional condition only.

•

only sufficiently qualified and authorized personnel
operate the Safety modules.

•

This documentation is complete and in readable
condition and available at the site of operation.

«
...
8
9
10
11
12
...
»

Содержание SCP 211







































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды