SIGMATEK AI 022-1, Руководство по эксплуатации

Страница: 7 / 26

S-DIAS STRAIN GAUGE INPUT MODULE AI 022-1
04.11.2020 Page 5
1.2 Electrical Requirements
Voltage supply from S-DIAS bus +5 V
Current consumption on the
S-DIAS bus
(+5 V power supply) typically 50 mA maximum 55 mA
Voltage supply from S-DIAS bus +24 V
Current consumption on the
S-DIAS bus
(+24 V supply) without a load on
the measurement bridge supply typically 17 mA at +18 V
typically 15 mA at +24 V
typically 14 mA at +30 V
maximum 20 mA at +18 V
maximum 18 mA at +24 V
maximum 17 mA at +30 V
Current consumption on the
S-DIAS bus
(+24 V supply) with maximum
load on both measurement
bridge supplies typically 92 mA at +18 V
typically 71 mA at +24 V
typically 59 mA at +30 V
maximum 110 mA at +18 V
maximum 85 mA at +24 V
maximum 71 mA at +30 V
If this S-DIAS module is connected to an S-DIAS supply module with several other
S-DIAS modules, the total current of the modules used must be determined and
checked.
The total current of the +24 V supply cannot exceed 1.6 A!
The total current of the +5 V supply cannot exceed 1.6 A!
The specification for the current can be found in the module-specific documentation
under "Electrical Requirements".
Si ce module S-
DIAS est connecté à un module d’alimentation S-DIAS suivi de
plusieurs modules S-DIAS, le courant total des modules utilisés doit être déterminé
et vérifié.
Le courant total de l'alimen24 V ne peut pas dépasser 1,6 A!
Le courant total de l'alimen5 V ne peut pas dépasser 1,6 A!
Le cahier des charges pour le courant peut être trouvé dans la documentation
spécifique au module sous "Spécifications électriques".