Sigmann DELTA SD160ex, Руководство по эксплуатации

Страница: 10 / 45

SD160 ex _BA_en_004 7
Caution
on laser devices
Devices fitted with laser fall under standards US 21 CFR 1040.10 and EN
60825-1. The laser's classification is stated on a plate affixed to the device.
Class 1 lasers are deemed inherently safe during normal use, but users must
not look directly into the light source. The following declaration is required by
American and international laws:
Usage of control elements, adaptations or the use of procedures that differ from
these instructions may result in a dangerous exposure to laser beams.
Class 2 lasers use a visible low-voltage LED. As with any source of bright light,
such as the sun, the user should avoid looking directly into the light. Brief expo-
sure to a class 2 laser is deemed not dangerous.
Maintenance Provided the device is operated and assembled according to instructions and
the ambient requirements are being met continuous maintenance is not neces-
sary.
Servicing Operators of electric equipment in hazardous areas are obliged to have them
serviced by qualified electricians (IEC 60079-19 and IEC 60079-17).
Repairs Repairs may only be carried out by the manufacturer or by persons trained and
commissioned for this purpose by the manufacturer.
The device is closed ex-factory. It may only be opened in the factory by specifically trained personnel.
Software installation For instructions on how to install the software at the PC please refer to the
manual issued by SICK Vertriebs-GmbH in Düsseldorf.
Operation Before operating the device you must ensure that all necessary components are
available.