SIGMAKOKI JS-300, Руководство пользователя

Страница: 7 / 11

-7-
2-2. Operating method
① LCD panel
Display the position coordinates for each axis and the operating mode.
Display Digit : 16 digit
×
4 lines
②
MODE button
Change an operation mode of the controller.
HOST
→
MANUAL
・・・
Refer to a User’s Manual of SHOT-302GS/SHOT-304GS for various modes.
NOTE) IN SHOT-702, the MODE change is invalid.
③ E-ORG button
Position stage at logical origin “0” for all axes.
The LED indicator lights up when the stage is moving and lights off when the stage is at
logical position.
④ ZERO button
Reset position coordinates for all axes to zero.
⑤ Axis select button
Selects the axis operated by joystick as “ 1 and 2 axis” or “3 and 4 axis”.
The LED indicator lights up when “3 and 4 axis” can be operated by joystick.
NOTE) This button is only usable with SHOT-304GS.
⑥ Joystick
Enables operation of “1 and 2 axis” or “3 and 4 axis”.
A move of the joystick continuously moves the stage continuously.
Releasing the stick stops the stage.
Move the joystick again after putting the joystick in neutral for over a second
when inverting moving direction of each axis. It may not work without the
required operation.