Sigma x-treme PQ24, Руководство пользователя

Страница: 12 / 52

P
A
G
Tips: SIM does not support hot plug. Do not remove SIM in standby mode for
fear of damaging SIM card.
1.2 Insertion and removal
of Memory Card
Turn off the phone, open the left upper cover.
With a thimble inserted the card slot inside the
round hole. Remove the card seat. Fit memory
card to the card seat, with the metal surface
downward and the edge and corner of the card
fitting with the card slot. Slide the memory card
buckle to the right place and then press it down to
fix the card.
Before removing the memory card, turn off the
phone first, and then remove the card seat of the phone.
Tips: This phone does not support memory card hot plug.
1.3 Remove and install the battery
The battery is built-in.
Note : the battery of the phone cannot be removed manually.
1.3.1 Battery Charging
When the new battery is not fully charged, before the use of mobile phone,
you should use up the power of the battery, and then charge the battery by the
following ways.
1. Insert the connector of the charger into the charger socket of the mobile
phone.
2. Insert the charger into the power supply, the battery symbol will be
dynamically displayed, indicating that the battery is being charged.
When charging is finished, the full battery symbol will be displayed, to prompt
that charging is finished.
After charging is finished, please remove the charger from the power supply,
and then unplug the charging plug from the mobile phone.
Tips: you can charge your mobile phone through USB data connecting line