Sensor set-up
Surface-mounted with side-wiring
1
. Remove the lens and metal cover in
the middle
2
, Cut off wires coming out of 3/4” hole
and seal the hole with provided plug.
Drill 4 holes on four corners and fix it
onto the ceiling with suitable screws
3
. Remove 1/2” plug against the
direction you intend to connect the
conduit
4
. Relocate the wire from 3/4” hole to 1/2” hole and connect
to the conduit as following
Line
Neutral
Green/Yellow
Ground
Black
White
5
. Put back the middle metal cover and lens, make sure no
wires are pinched or exposed during the whole process
1
. Remove the lens
2
. Adjust the combination of DIP switches
with appropriate tool according to needs
3
. Put back the lens and check the
function of sensor
