Sigma 3-30KS Скачать руководство пользователя

Страница: 43 / 93

Refrigerated Centrifuge Sigma 3-30KS

6 Using the centrifuge

Version 07/2012, Rev. 1.22 of 02/06/2021

• sb

43 / 93

Translation of the original operating manual, part no. 0701302

Fig. 17: Program "RAPID_TEMP"

NOTE

The program will only be loaded if the actual temperature is above the set
temperature.

• Press the start button in order to start the rapid cooling run.
• During the rapid cooling run, the set temperature can be modified within

the range below the actual temperature.

The current status of the program will be displayed on the status bar.

The

“RAPID_TEMP“ program will be stopped under the following

conditions:
• The set value is reached. In this case, the "RAPID_TEMP" program

stops with a sound signal and the standstill cooling system will be
activated.

• The stop button is pressed. The "RAPID_TEMP" program will be

stopped prematurely. No message will be issued when the set
temperature is reached.

• A parameter is changed (except for the temperature) or another input is

made. In this case, the "RAPID_TEMP" program will be aborted. No
message will be issued when the set temperature is reached.

After the stop, the previous program will be reloaded or the changed
parameters will be adopted as the new settings.

NOTE

The automatic lid opening function is suppressed after a rapid cooling run
in order to prevent the system from reheating.

NOTE

The delta T temperature monitoring system (see chapter 6.3.2.7 -
"Parameters menu", Process) remains inactive as long as the
"RAPID_TEMP" program is active.

Содержание 3-30KS






























































































Результаты поиска

Содержание 3-30KS

Отзывы:

Похожие инструкции для 3-30KS

Бренды по названию

Популярные бренды

Sigma 3-30KS, Руководство по эксплуатации

Результаты поиска

Содержание 3-30KS

Отзывы:

Похожие инструкции для 3-30KS

Бренды по названию

Популярные бренды