Sigma mobile X-treme PQ27 Plus, Руководство пользователя

Страница: 8 / 35

8
requirement NOT to dispose the equipment as unsorted municipal waste,
but use the return and collection systems according to local law.
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement
1999/519/EC, Council Recommendation of 12 July 1999 on the limitation
of exposure of the general public to electromagnetic fields (0-300 GHz).
This equipment meets the following conformance standards: EN301489-1,
EN301489-17, EN55022/24, EN60950-1, EN300328.
1. Introduction
1.1 Insertion and removal of SIM Card
Turn off the phone, and remove the rear cover and other external power
source. Fit SIM card to the SIM seat, with the metal surface downward and
the edge and corner of the card fitting with the card slot. Slide the SIM
card buckle to the right place and then press it down to fix the card. If you
need to take out SIM card, please turn off the phone first, remove the
external power source, remove the rear cover, slide the SIM card buckle to
right place and then release it upward, and at last remove SIM card lightly.
Tips: SIM does not support hot plug. Do not remove SIM in standby mode
for fear of damaging SIM card.
1.2 Insertion and removal of Memory Card
Turn off the phone, remove the rear cover, fit the memory card into the
memory card slot, install the memory card fixer and pull down the fixer,
and at last reinstate the rear cover.
Before removing the memory card, turn off the phone first, and then
remove the rear cover of the phone.
Tips: This phone does not support memory card hot plug.
1.3 Remove and install the battery
The battery is built-in.
Note : the battery of the phone cannot be removed manually.
1.3.1Battery Charging
When the new battery is not fully charged, before the use of mobile phone,
you should use up the power of the battery, and then charge the battery by
the following ways.
1. Insert the connector of the charger into the charger socket of the mobile
phone.
2. Insert the charger into the power supply, the battery symbol will be
dynamically displayed, indicating that the battery is being charged.