Sigma Metalytics PMV Pro 2601, Быстрое руководство

Страница: 19 / 22

Place Sample:
-To start place middle of sample under sensor
-Push plunger down to contact with sample or sample holder
Screen will show width entry field
-The width must be entered to continue
-Measure sample with calipers or scale on external bridge overlay
-Enter the measured width of the sample with the arrow keys
( to enter the width use the number entry procedure as shown
on page 5 of the manual for weight entry.)
Dimensions
Width: -
m7s.o
Min.Length : 0.0
Max. Length: 0.0
Area (sq mm): 0.0
For bars with angled sides
measure in the center of the sides
When done press Measure
a
Reading Results:
-Read measure screen as usual-
-Reading may take several seconds to stabilize
Silver-Silver Pure
&! - - -
1.60
-
1.58
Dia: 76.56 mm Thick: 25.0 mm
Sample Area: 7585sq mm
Wt PM: 100.00 Ozt Tot: 100.00 Ozt
DIM
Press Dim
a
to show length
-Dimension screen shows min. and max. length
Dimensions
Width: - [076.2
Min.Length: 95.1
Max. Length: 107.2
Area (sq mm): 7585.8
Measure length with calipers or overlay to confirm size
External Bridge Sensor
1 5