background image

Warranty and Service

We warrant this product for a period of one year (12 months) from the date of purchase. 
This guarantee applies to materials or operational defects, which are present at the time 
of purchasing the product. During that period we will repair or replace, without service 
charge, any product deemed defective due to those causes. 
You will be required to present proof of purchase (invoice or receipt). This warranty does 
not cover the damage due to wear, overloading, incorrect handling or use of incorrect 
accessories. This does not affect your statutory rights.   

        Instruction for disposal of WEEE by users in the European Union

Electrical equipment marked with the crossed wheelie bin symbol must not 
be discarded in the standard household waste. Instead, it should be taken 
to a suitable specialist disposal location or your dealer.

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the 
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, 
also in part, is prohibited. These operating instructions represent the technical status at the time of printing.
Changes in technology and equipment reserved.

       Sigma EQ Touch II

This product complies with the essential requirements of all appropriate 
EU directives. A copy of the declaration of conformity can be obtained from 
Ripmax Ltd, www.ripmax.com

Distributed by Ripmax Ltd., 241 Green Street, Enfield. EN3 7SJ. United Kingdom 

- 15 -

Содержание Touch II









Отзывы: