SIGLENT SSA5000A, Быстрое руководство, Страница: 22 / 36

20 SSA5000A Quick Guide
NO. Name Description
5
USB
Device Through this interface, the analyzer can be connected to
PC for remote control.
6 HDMI
Output the LCD screen display to the external monitor
through HDMI cable for synchronous display.
7 Audio
Audio jack, which can be externally connected with
headphones or speakers to monitor the audio
demodulation output.
Set the parameter in Meas Setup menu.
8 OCXO
The OCXO reference clock source with better
temperature coefficient and clock accuracy can be
selected to obtain a more stable reference clock. This
module is a factory installed option.
9
REF IN
10 MHz
Input a 10 MHz reference clock to the analyzer.
Set the parameter in Input/Output menu
10
REF OUT
10 MHz
Output a 10 MHz reference clock in the analyzer.
The [REF IN] and [REF OUT] connectors are usually
used to build synchronization among multiple
instruments.Set the parameter in Input/Output menu
11
TRIG
OUT
Trigger output to indicate various working states inside
the analyzer, which is used to establish event
synchronization among multiple instruments.
Set the parameter in Input/Output menu.
12 TRIG IN
In external trigger mode, the analyzer will update the
trace scan after the Trigger In connector receives an
external trigger signal that meets the trigger input
specifications. Set the parameter in Trigger menu.
13
AC Power
Supply
Before power on, please ensure that the ground wire of
AC power supply is well connected with the earth, and
the fuse works normally.