SIGLENT TECHNOLOGIES SDG6000X Series, Руководство пользователя

Страница: 151 / 198

SDG6000X User Manual 141
2.8.8 Clock Source
The SDG6000X provides a 10 MHz internal clock source and also accepts
external clock source input from the [10MHz In] connector at the rear panel. It
can also output a 10 MHz clock source from the [10MHz Out] connector for
other device to use.
Note: External clock source should be a signal with frequency equal-to 10
MHz and amplitude larger than 1.4 Vpp.
Press Utility
→ Page 1/3 → Clock to enter the following interface.
Figure 2-100 Clock Source Interface
Source
Press Source t
o select “Internal” or “External”. The default is “Internal”. If
"Internal" is selected, the clock source icon on the interface will be shown as
. If "external" is selected, the clock source icon on the interface will be
shown as .
10MOut
Press 10Mout t
o select “Enable” or “Disable”. The default is “Enable”. If