Sigicom INFRA Point, Руководство пользователя

Страница: 38 / 58

38
Copyright © Sigicom AB 2003-2013
INFRA MASTER
1. Before starting the INFRA Master,
connect the sensors using your
INFRA cables, ports and termina-
tion plugs, see section 5.3.
2. Press [F1] (also marked ”LCD”)
to start the LCD display.
3. If REG is OFF (see section 3.1.2),
this Start-up menu is shown for
10-30 seconds.
INFRA Master now connects to all
nodes to read their type, serial no.,
and individual settings. (The lower
right text is debug information.)
4. When all parts of system are con-
nected, a status menu will be
shown for some seconds (can be
bypassed by pressing [F2]).
Possible warnings and non-
standard settings are shown with
alternating flashing texts.
6.3 Use Cases and Menus
6.3.1 Startup
Comm
Lo. batt
Reg. On
LCD
F1
F2
Infra Master Startup
Please wait.
03:04:99
3
Comm
Lo. batt
Reg. On
LCD
F1 F2
2
Comm
Lo. batt
Reg. On
LCD
F1
F2
4
INFRA-01023 OFF
Ver: 0.7.0-0.7.1
Batt: 12.34
2Continue