EAN-SCD-Cameras
© SightLine Applications, Inc.
1
1
Overview
This document covers how to setup and configure the SightLine OEM video processing boards to
receive video from SCD cameras.
1.1
Additional Support Documentation
Additional Engineering Application Notes (EANs) can be found on the
SightLine Applications website.
The Panel Plus User Guide provides a complete overview of settings and dialog windows. It can be
accessed from the Help menu of the
The Interface Command and Control (
) describes the native communications protocol used by the
SightLine Applications product line. The IDD is also available as a PDF download on the
page under Software Support Documentation.
1.2
Sightline Software Requirements
IMPORTANT:
The Panel Plus software version should match the firmware version running on the
board. Firmware and Panel Plus software versions are available on the
1.3
Third Party Software
Camera control software from
2
Safe Device Handling
CAUTION:
To prevent damage to hardware boards, disconnect all input power to OEMs and adapter boards before
connecting or disconnecting cables including all FFC, FPC, KEL, HDMI, MIPI, and round wire (Molex) cables.
CAUTION:
To prevent damage to hardware boards, use a conductive wrist strap attached to a good earth ground.
Before picking up an ESD sensitive electronic component, discharge built up static by touching a grounded bare
metal surface or approved antistatic mat.
3
Interface Boards and Adapters
System interface boards provide options for network interfacing, serial ports, and GPIO.
Camera
interface and adapter boards provide an interface from the camera to OEM.
for complete specifications and pinouts.
IMPORTANT:
All boards should be connected and secured with the included cables and hardware
fasteners first before applying power.
4
SCD Mini Blackbird
ICD-OEM-Camera Side Interfaces
video processing boards to the SCD Mini Blackbird camera through the SCD-100 interface board.
The SDI output module must be removed from the 100-pin connector on the Mini Blackbird camera
and replaced with the Sightline SLA-SCD-100 adapter board.
