-
Send data with the current measurement
: 2 short presses. This can be used to send an alert.
-
Reset the Sens’it
: 4 shorts presses (in Button mode only). The Sens’it returns to factory
settings.
AVAILABLE MODES
The Sens’it can be configured in 6 different modes. Each mode has a specific color:
-
Green
: Temperature and Humidity mode. The Sens’it sends sensor data at a defined
frequency.
-
Yellow
: Light mode. The Sens’it either sends light sensor data at a defined frequency.
-
Light blue
: Door opening detection. The Sens’it is affixed to a door, and sends data every
time the door is being opened (through its magnetometer).
-
Dark blue
: Vibration detection. The Sens’it sends data every time the accelerometer has
detected a movement.
-
Pink
: Magnet mode. The Sens’it sends data every time a magnet is put near the right side of
the Sens’it.
-
White
: Button mode. The Sens’it sends data every time the button is pressed.
You can change mode by doing a long press on the button.
The sending frequency can be defined on the online app: every 10 minutes, every hour, every 6
hours, every 24 hours. You can also trigger an immediate data transmission by making two short
presses on the button.
By default, only one mode can be selected at a time.
TECHNICAL SPECIFICATIONS
RADIO CHARACTERISTICS
MECHANICAL CHARACTERISTICS
-
Dimensions (W x H x D): 52 mm x 82 mm x 15 mm
-
Weight: 50 g
-
Solid particle protection: IP54
ENVIRONMENTAL CHARACTERISTICS
3.1
3.2
3.3
3.4
TX frequency
868.13 MHz
902.2 MHz
923.2 MHz
920.8 MHz
RX frequency
869.525 MHz
905.2 MHz
922.2 MHz
922.3 MHz
TX power
14 dBm
22 dBm
7 dBm
22 dBm
Sigfox Ready class
U0
U0
U1
U0