SENS’IT 3 USER MANUAL
Table of contents
Table of contents ..................................................................................................................................... 1
SENS’IT 3 - 5 SENSORS, ONE BUTTON, SO MANY POSSIBILITIES ............................................................ 1
DEVICE ACTIVATION ................................................................................................................................ 1
USER INSTRUCTIONS ............................................................................................................................... 1
AVAILABLE MODES .................................................................................................................................. 2
TECHNICAL SPECIFICATIONS .................................................................................................................... 2
SENS’IT FOR DEVELOPERS ....................................................................................................................... 3
SENS’IT 3 - 5 SENSORS, ONE BUTTON, SO MANY POSSIBILITIES
Sens’it is a configurable multi-sensor device: you can adapt it to many use cases, and build your own
usage. The number of sensors it provides, along with its ability to communicate wherever there is
Sigfox coverage, open it to a wide array of possibilities.
DEVICE ACTIVATION
It only takes a few minutes to get started with your Sens’it:
1.
Visit www.sensit.io and click on “Start with my Sens’it”.
2.
Use the ID that is printed on the back of the Sens’it.
3.
Make a long press (two seconds) on the button to change mode and send a message.
The main LED will turn light up in the color of the chosen mode (see below).
4.
Wait until the LED blinks: this shows that data is being transmitted.
5.
You can now access your sensit.io dashboard and see the transmitted data.
USER INSTRUCTIONS
The Sens’it is easy to configure:
1.
Select the mode you want to use (see below).
2.
Place the Sens’it on asset or in the location about which you want information and leave it.
…or press the Sens’it button twice to send data.
3.
Keep track of your data on the online dashboard.
…or receive notifications when a threshold is passed.
The Sens’it button has a different action depending on how it is pressed:
-
Indicate the current mode
: one short press. The LED will blink in the current mode color.
-
Change mode
: one long press. The LED changes color depending on the active mode. You can
keep pressing the button and it will keep switching mode until you stop. Once a mode is
chosen, the Sens’it sends data.
