SIG RASCAL ARF, Инструкция по сборке, Страница: 16 / 18

16
C O M P L E T E K I T PA R T S L I S T
Pre-Built Parts:
❑ 1 each Fuselage, Covered With Speed 400 Motor Mount Installed
❑ 1 each Battery Hatch, Covered
❑ 1 each Landing Gear Spreader, Covered
❑ 1 each Horizontal Stabilizer, Covered
❑ 1 each Elevator Set, Covered
❑ 1 each Vertical Fin, Covered
❑ 1 each Rudder, Covered
❑ 1 set Left & Right Wing Panels, Covered
❑ 1 each Wing Center Section, Covered
❑ 1 set Elevator & Rudder Control Horns
❑ 1 set Left & Right Tailwheel Pant Halves
❑ 1 set Left & Right Main Wheel Pants
Formed Wire Parts:
❑
1 each Main Landing Gear Wire, .09" Diameter
❑
1 each Tail Wheel Wire, .031 Diameter
Hardware:
❑ 6 each #2 x 3/8" Sheet Metal Screws - Battery Hatch 2, Motor Mounts 4
❑ 4 each #2 x 1/4" Sheet Metal Screws - Wheel Pant Mounting
❑ 2 each Braided Cable, .031" Dia. x 18" - Rudder & Elevator Pushrods
❑ 2 each Paper Clips - Cable Linkages
❑ 4 each Brass Tubing, 1/16" x 1/4" - Pushrod/Linkage Connectors
Molded Parts:
❑
2 each Nylon Landing Gear Clips, 3/32" - Wheel Pant Attachment
❑
1 each Nylon Wing Bolt, 4-40 x 1" - Rear Wing Hold-Down
❑
1 each Spinner Kit, 1-1/2" Dia. White, With Adapter Rings
❑
1 sheet Clear Plastic Molded Side Windows
Miscellaneous:
❑ 1 each Plywood Switch Mounting Plate
❑ 6 each CA Hinges - 2 For Rudder, 4 For Elevators
❑ 4 each White Self-Adhesive Strips, 1/4" x 10" - Wing Joint Covering
❑ 2 each Main Wheels, 1-3/4" Dia.
❑ 1 set Velcro Tape, 3/4" x 4-1/4" - Battery Pack Retention
❑ 1 sheet Card Stock Landing Gear Patterns/Fairings - Printed
❑ 1 each Instrument Panel, Printed
❑ 1 each Rascal Decal Set
❑ 1 each Assembly Manual
Power Package:
❑
1 each Speed 400 Motor, 7.2 V
❑
1 each Speed 400 Promax Gearbox, With 1 Propeller Shaft Adapter, 2 Mounting Bolts and
Pinion Gear Set With 2:1, 2.5:1 & 3:1 Ratios
❑
1 each SIG 20Amp Electronic Speed Controller (ESC) Pre-Soldered to Motor