Introduction and System Requirements
The Signal Interface Group (SIG) Acoustic Camera, or ACAM, is a sensor containing an array of
microphones, an optical camera, and a communications and control module (CCM). The CCM is located in a
small box on the back of the ACAM; it is connected to the PC through a USB cable. The CCM implements the
hardware interface between the SIG Acoustic Camera and a PC.
The CcmAccess software is the interface between the SIG Acoustic Camera and a PC application. The
CcmAccess software includes a Windows dll and a Windows service.
A Windows application provides the user interface to the SIG Acoustic Camera. All applications require the
CcmAccess software.
The CcmAccess software has the following system requirements:
•
Windows 7 or higher
•
64-bit processor
•
64-bit operating system
•
at least one free USB port
Applications of the SIG Acoustic Camera typically are computationally intensive. Depending on the
application, the following may be required:
•
recent generation core-i5 or core-i7 processor
•
graphics processor
•
at least 8 Gb RAM
1
