-2-
Warnings and Disclosures
- Follow all installation and operating procedures.
- The propane heater requires an installed flue for correct operation.
Do not attempt to operate the heater without the flue chimney installed correctly as required
in this manual.
- If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury, or loss of life.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
- Do not use substitute valves, burners, or fan motors
- Turn off the heater when refueling.
-
Do not install this appliance in spaces containing internal combustion engines, fuel tanks, or
joints and fittings of their fuel systems.
- Use only approved materials, hose, regulators and fittings to install.
10ft Hose – ULC Type III CGA St 8.1 – Prt# 15205
20ft Hose – ULC Type III CGA St 8.1 – Prt# 15206
Propane Low Pressure Regulator UL/C.G.A – Prt# 15203
-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
- Installation must conform with local codes or in the absence of codes, with current National
Fuel Gas Code, ANSI Z223.1 or current CAN/CGA B149, Installation Codes.
- Manufactured or mobile home installation must conform to Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280, or, when not applicable, the
Standard for Fire Safety Criteria for Manufactured Home Installation Sites and Communities,
ANSI/NFPA 501A,(USA) or Mobile Homes Standard, CAN/CSA-Z240 MH Series, in Canada
- Main gas valve must be disconnected from gas supply system during any pressure test of
the system at pressures greater than ½ psi (3.5 kPa, 27.4mBar)
-
DO NOT OPERATE THIS HEATER UNATTENDED !
