21
INSTALLATION & OPERATION
1
4.0mm
400-500
300-400
200-320
§3.4.7 Wireless Foot Pedal Configuration
TIG series of welding machines can be configured to communicate exclusively with
wireless foot pedal. This is done by a simple process of synchronising the wireless
remote control and the machine frequencies. Each interface frequency assigned is
unique, so it is possible to use several wireless control systems/ machines in the same
area with no problems. The direct range of the wireless control system is approximately
100m, this will be affected by the physical location of the machine and the remote
control.
Socket Pin
Function
1
Not connected
2
Not connected
3
Not connected
4
Not connected
5
Not connected
6
The button of "UP" input
7
The button of "DOWN" input
8
Trigger Switch Input
9
Trigger Switch Input
10
Not connected
11
The button of "UP"& "DOWN" input
12
Not connected
Remote Control Socket
Tungsten
Diameter
mm
DC Current Amps
Torch Negative
2% Thoriated
AC Current Amps
Un-Balanced wave
0.8% Zirconiated
AC Current Amps
Balanced wave
0.8% Zirconiated
1.0mm
15-80
15-80
20-60
70-150
70-150
60-120
150-250
150-250
250-400
100-180
225-325
160-250
1.6mm
2.4mm
3.2mm
4.0mm
400-500
300-400
300-400
