GUN
www.sifbronze.co.uk
8
8. Maintenance
WARNING
ALWAYS SWITCH OFF THE WELDING MACHINE AND
EXTRACTION UNIT BEFORE YOU REMOVE PARTS OF THE TORCH.
Daily
Regularly check if the protective gas and extraction openings are clean.
If necessary remove the nozzle and clean the opening with the brush.
Weekly
Clean liner
1. Disconnect the torch assembly from the welding machine.
2. Remove the nozzle (A) and contact tip (B) from the torch.
A
B
3. When necessary, remove welding wire from the assembly.
4. Use a compressed air cleaning gun to clean inside liner.
!
