INSTALLATION
1.
Location:
Install the compressor in a covered, well ventilated area, free of dust, gases,
toxic gases, humidity, or any other kind of pollutant. The maximum ambient
temperature recommended during operation is 104 degrees Fahrenheit.
a. IMPORTANT:
Avoid installation in small places such as a storeroom or closet..
2.
Position:
Mount at least 32 inches (800mm) from any obstacle, to allow good ventilation
during operation and to make maintenance easier.
a. Compressor Installation: When connected to the air network,
the discharge
connection must be joined by means of a hose or expansible gaskets
so that the
charges, thermal expansion, piping’s weight, mechanical and thermal shocks or
obstructions are not transmitted to the air tank. Physical damage to the
compressed air tank may occur if the above warnings are not followed.
3.
Foundation/Floor:
The compressor must be placed on a concrete base, which must be
able to bear the equipment’s weight. The equipment must be level. The compressor is
equipped with rubber feet (Assembled by installer)
4.
Electric Connection:
a. Consult a specialized electrician to evaluate the electrical power supply and to
select the adequate protections and input devices, and to perform the
installation service.
10
