Sierra
OUTDOOR DESIGNS
24 inch Trash Cabinet
10
Please contact 570-385-4733 or [email protected] for further assistance
Assembly - continued
5
Front
6
Figure 7
Front
Bottom Assembly
Metal Square
Parts needed for 24 inch Trash Cabinet
1
Metal Square
Short Arm Hex Key
Square all the posts and tighten screws.
Take a metal square and square up all the posts. As you square
up the posts, tighten all the screws. (see fig. 7)
Figure 8
Front
Parts needed for 24 inch Trash Cabinet
2
Back panels
BP2426
*
6
ButtonSoc Cap screws L1-0002
Short Arm Hex Key
Attach the back panel.
To attach the back panel, place the panel between corner posts.
Place all the ButtonSoc Cap screws in by hand on the inside of
the panel and post. (see fig. 8) NOTE: The panel will only go on
one way as the holes match up with the post and panel.
The panel will use 6 screws. Once all the screws are in place, go
back and tighten them all with the Short Arm Hex key.
* Part numbers are for stainless steel panels. If you have faux stone
or filler panels, you can find part numbers on page 6.
