Sierra Wireless FX30S, Руководство пользователя

Страница: 16 / 74

Sierra Wireless FX30S User Guide
Rev 2 Mar.18 16 41110485
Mounting on a DIN Rail
To mount the FX30S in a DIN rail:
1. Attach the DIN rail clips to the bracket as shown in Figure 2-8 .
If you are mounting the FX30S on its edge, attach one DIN rail clip to the side
of the bracket.
If you are mounting the FX30S horizontally or vertically, attach two DIN rail
clips to the bottom of the bracket.
Figure 2-8: Attaching the DIN rail clips
2. Slide or snap the FX30S onto the bracket, as shown in Figure 2-4 .
3. If the DIN rails are in a high vibration environment, see Optional—Mounting
in a High Vibration Environment on page 14.
4. Attach the FX30S to the DIN Rail. See Figure 2-8 .
Replacing existing Fastrack Supreme or
Fastrack Xtend Device
If you are going to be mounting the FX30S in a location where you previously had
a Fastrack Supreme or a Fastrack Xtend mounted, attach the compatibility bar to
the bracket. The compatibility bar is available from Sierra Wireless.
Note: Adding the compatibility bar does not change the height of the g mounting
bracket. See
Figure 3-4 on page 55.
For this orientation, attach one DIN
rail clip to the side of the bracket.
For these orientations, attach two DIN rail clips to the bottom of the bracket.