Sierra Wireless Compass 597, Руководство пользователя

Страница: 19 / 49

Installation
Document 2130948. Rev 1.0 Jan.08 19
c) Install the file on your computer, remove the Com ‐
pass USB modem from your computer, then rerun the
Compass USB modem installation.
6. Use the
Next
and
Back
buttons to navigate through the
wizard noting the following:
· To proceed with the installation, you must click
I accept
the terms in the license agreement
to indicate your accep ‐
tance of the terms of the license agreement.
· Use the default settings for the
Destination Folder
unless
you have special requirements and an advanced under ‐
standing of PC configuration. (The Destination Folder
dictates where the software is installed.)
Windows detects the Compass USB modem and installs
the drivers for it. This may take a few minutes. Once com ‐
pleted, the system tray may display the message “Your
devices are ready to use“ or “Your new hardware is
installed and ready to use”:
7. When you are notified that the installation is complete,
click
Finish
.
8. If Watcher has not started automatically, start it: double ‐
click the Watcher icon on your desktop.
Proceed to configure the Compass USB modem to use your
account (if it was not pre ‐ activated). See “Activation” on
page 23.