Hardware Integration Guide
Rev 1 Jul 17
16
41111210
1.
The end product must use the RF trace design approved with the AirPrime
WP7601 module. The Gerber file of the trace design can be obtained from
Sierra Wireless upon request.
2.
At least 20 cm separation distance between the antenna and the user’s body
must be maintained at all times.
3.
To comply with FCC/IC regulations limiting both maximum RF output power
and human exposure to RF radiation, the maximum antenna gain including
cable loss in a mobile-only exposure condition must not exceed the limits
stipulated in
Table 5-1 on page 16
.
4.
The AirPrime WP7601 module may transmit simultaneously with other collo-
cated radio transmitters within a host device, provided the following conditions
are met:
·
Each collocated radio transmitter has been certified by FCC/IC for mobile
application.
·
At least 20 cm separation distance between the antennas of the collocated
transmitters and the user’s body must be maintained at all times.
·
The radiated power of a collocated transmitter must not exceed the EIRP
limit stipulated in
Table 5-2
.
5.
A label must be affixed to the outside of the end product into which the
AirPrime WP7601 module is incorporated, with a statement similar to the
following:
· This device contains FCC ID: N7NWP76A / IC:2417C-WP76A.
Table 5-1: WP7601 Antenna Gain Specifications
Device
Technology
Band
Frequency
(MHz)
Maximum
antenna gain
(dBi)
AirPrime
WP7601
LTE
4
1710–1755
6
13
777–787
6
Table 5-2: Collocated Radio Transmitter Specifications
Device
Technology
Frequency
(MHz)
EIRP Limit
(dBm)
Collocated
transmitters
a
a.
Valid collocated transmitter combinations: WLAN+BT; WiMAX+BT.
(WLAN+WiMAX+BT is not permitted.)
WLAN
2400–2500
25
5150–5850
27
WiMAX
2300–2400
25
2500–2700
25
3300–3800
25
BT
2400–2500
15
